Fujitsu PRIMERGY RX200 S8 - Page 20

System configurator and order-information guide
L
PRIMERGY RX200 S8 Status 30-01-2014
Section
IX
External SAS Disk Array & Backup drives
SAS RAID controller for JBOD subsystems
Lose delivery options
S26361-F3713-E203 S26361-F3713-L203
RAID Ctrl SAS 6G 8port external RAID Ctrl SAS 6G 8port external
LSI MegaRAID SAS 9286-8e LSI MegaRAID SAS 9286-8e
1GB Cache with ECC 1GB Cache with ECC
RAID 0, 1, 5, 6, 10, 50 & 60 RAID 0, 1, 5, 6, 10, 50 & 60
without FBU without FBU
SAS 6Gb/sec SAS 6Gb/sec
8 port external 8 port external
PCIe 3.0 x8, MD2 form factor PCIe 3.0 x8, MD2 form factor
low profile bracket low profile bracket
1x
max. 1x per system
max. 1x per system
S26361-F3669-E155 S26361-F3669-L110
Flash Backup Unit Flash Backup Unit
with 47cm cable set
with 17, 47, 62 cable set
max. 1x per Controller max. 1x per Controller
S26361-F3669-E661 S26361-F3669-L661
RAID Advanced Software Options RAID Advanced Software Options
License Activation Key License Activation Key
for CacheCade 2.0 and FastPath for CacheCade 2.0 and FastPath
for 1 Controller for 1 RAID Ctrl S26361-F3713-xxx
BBU / FBU max. 1x per system possible
SAS controller for external backup drives
S26361-F3628-E201
SAS Controller 6Gb/s 8 port LP
LSI SAS9200-8e LP
2x
PCIe 2.0
ext: 8 port
PCIe x4, Low Profile
max. 2x per system
PCIe SSD (occupies one PCIe slot)
S26361-F4522-E351 S26361-F4522-E781 S26361-F4522-E121 loose delivery:
PCIe-SSD 365GB MLC PCIe-SSD 785GB MLC PCIe-SSD 1.2TB MLC -L351/L781/L121
2x
ioDrive2 365GB ioDrive2 785GB
ioDrive2 1.2TB
PCIe 2.0 PCIe 2.0 PCIe 2.0
25nm Lithography 25nm Lithography 25nm Lithography
PCIe x4, Low Profile PCIe x4, Low Profile PCIe x4, Low Profile
max. 2x per system
max. 2x per system
max. 2x per system
M
Fujitsu PRIMERGY Server 20 of 28