Fujitsu PRIMERGY RX200 S8 - Page 24

System configurator and order-information guide
PRIMERGY RX200 S8 Status 30-01-2014
P
F) Fibre Channel over Ethernet
S26361-F3592-E202
Loose Delivery: S26361-F3592-L202
10GBit/s CNA
Emulex
OCe10102
2 channel 10GBit/sec CNA
SFP+ Cage
PCIe x8, 170mm
max. 2 per system
S26361-F3592-E108
The SFP+ Module is also available as loose delivery
SFP+ Module MMF 10GbE LC S26361-F3592-L108
SFP+ module for 10 Gbit
Instead SFP+ Modules, SFP+ twinax cables from
2x Ethernet FO cabling the switch vendors may be used
ext:LC-connector
max. 2x per adapter
V:TWX Connector-PY
for all Twinax (FTS,BR,CI)
max. 2x per adapter
S26361-F3989-E600 *)
S26361-F3873-E500 *)
S26361-F4571-E500 *)
*) in SA only
SFP+ active twinax cable
SFP+ active twinax cable
SFP+ passive twinax cable shown in
customized twinax cable for
customized twinax cable for
customized twinax cable for
cabling view
full rack setup ex factory full rack setup ex factory full rack setup ex factory
cable length is selected by cable length is selected by cable length is selected by
requirement in the factory
requirement in the factory
requirement in the factory
Fujitsu branded cable
Brocade branded cable
Cisco branded cable
max. 2x per adapter max. 2x per adapter max. 2x per adapter
separate orderable 10Gb Ethernet cables
S26361-F3989-L102 SFP+ aktives Twinax Kabel Fujitsu 2m
S26361-F3989-L105 SFP+ aktives Twinax Kabel Fujitsu 5m
S26361-F3989-L110 SFP+ aktives Twinax Kabel Fujitsu 10m
S26361-F3873-L501 SFP+ aktives Twinax Kabel Brocade 1m
S26361-F3873-L503 SFP+ aktives Twinax Kabel Brocade 3m
S26361-F3873-L505 SFP+ aktives Twinax Kabel Brocade 5m
S26361-F4571-L101
SFP+ passives Twinax Kabel Cisco 1m
S26361-F4571-L103
SFP+ passives Twinax Kabel Cisco 3m
S26361-F4571-L105
SFP+ passives Twinax Kabel Cisco 5m
S26361-F4571-L107 SFP+ aktives Twinax Kabel Cisco 7m
S26361-F4571-L110 SFP+ aktives Twinax Kabel Cisco 10m
G) Infiniband HCA's
as soon
as released
as soon
as released
S26361-F4475-E102 S26361-F4475-E122/E222 loose delivery: S26361-F4475-L102
IB HCA 40Gb 1 port QDR
PIB EP QLE7340e/42e loose delivery: S26361-F4475-L122/L222
IB HCA 1x 40Gb
Intel IB HCA 1x / 2x 40Gb
PCIe 2.0 (5,0GT/s)
PCIe 2.0 (5,0GT/s)
Low Profile PCIe form factor with
PCIe x8, low profile PCIe x8, low profile
exchangeable Full Height (FH)
ext: 1x QSFP-connector ext: 1x / 2x QSFP-connector
or Low Profile (LP) bracket
max. 2x per system max. 2x per system
only within a rack configurator
If additional length of copper cable or
optical cable are needed, then they must
S26361-F3996-E500 S26361-F3996-E203 S26361-F3996-E210 be ordered from the cable vendor directly
InfiniBand Cu Cable 40Gb
Intel IB Cu Cable 40Gb
Intel IB FO Cable 40Gb
Copper cable are also available for loose
customized delivery as
QSFP, 1m and 3m
QSFP, 3m QSFP, 10m S26361-F3996-L101, QSFP, 40Gb, 1m
max. 2x per adapter max. 2x per adapter max. 2x per adapter S26361-F3996-L103, QSFP, 40Gb, 3m
For the US market only:
2x
Due to EMI restrictions, only one IB FDR HCA
might be installed per system
S26361-F4475-E103/E203 S26361-F4533-E102/E202 loose delivery: S26361-F4475-L103/L203
IB HCA 40Gb 1 and 2 port QDR enhanced IB HCA 56Gb 1 and 2 port FDR loose delivery: S26361-F4533-L102/L202
IB HCA 1x / 2x 40Gb
IB HCA 2x 56Gb
PCIe 3.0 (8,0GT/s)
PCIe 3.0 (8,0GT/s)
PCIe x8, low profile PCIe x16, low profile
Low Profile PCIe form factor with
ext: 1x / 2x QSFP-connector ext: 2x QSFP-connector
exchangeable Full Height (FH)
max. 2x per system max. 2x per system
or Low Profile (LP) bracket
only within a rack
configuration
S26361-F3996-E556 If additional length of copper cable or optical cable are needed,
InfiniBand Cu Cable 56Gb then they must be ordered from the cable vendor directly
customized Copper cable are also available for loose delivery as
QSFP, 1m and 3m
S26361-F3996-L561, QSFP, 56Gb, 1m
max. 2x per adapter S26361-F3996-L563, QSFP, 56Gb, 3m
Q
Fujitsu PRIMERGY Server 24 of 28