Fujitsu PRIMERGY RX300 S8 Datasheet

Data Sheet FUJITSU Server PRIMERGY RX300 S8 Dual socket 2U rack server
Page 10 / 11 www.fujitsu.com/fts
RAID Controller RAID 5/6 Ctrl., SAS/SATA 12 Gbit/s, Fujitsu PRAID EP420i, 8 ports int.
RAID level: 0, 1, 10, 5, 50, 6, 60, 2 GB, Optional FBU based on LSI SAS3108
RAID 5/6 Ctrl., SAS/SATA 12 Gbit/s, Fujitsu PRAID EP400i, 8 ports int.
RAID level: 0, 1, 10, 5, 50, 6, 60, 1 GB, Optional FBU based on LSI SAS3108
RAID 5/6 Ctrl., SAS/SATA 6 Gbit/s, LSI LSI MegaRAID SAS 9286CV-8e,
RAID level: 0, 1, 10, 5, 50, 6, 60, 1 GB, Optional FBU (based on LSI SAS2208)
RAID 5/6 Ctrl., SAS/SATA 6 Gbit/s, Fujitsu RAID Ctrl SAS 6G 5/6 512MB (D2616), 8 ports int.
RAID level: 0, 1, 10, 5, 50, 6, 60, 512 MB Cache, Optional BBU for selected systems (based on LSI SAS2108)
RAID 5/6 Ctrl., SAS/SATA 6 Gbit/s, Fujitsu RAID Ctrl SAS 6G 1GB (D3116C), 8 ports int.
RAID level: 0, 1, 10, 5, 50, 6, 60, 1 GB, Optional FBU (based on LSI SAS2208)
RAID 0/1 Ctrl., SAS/SATA 6 Gbit/s, Fujitsu RAID Ctrl SAS 6G 0/1 (D2607), 8 ports int.
RAID level: 0, 1, 10, No BBU support
Fibre Channel controller Fibre Channel Host Bus Adapter 1 x 8 Gbit/s Qlogic QLE2560 MMF LC-style
Fibre Channel Host Bus Adapter 2 x 8 Gbit/s Qlogic QLE2562 MMF LC-style
Fibre Channel Host Bus Adapter 1 x 8 Gbit/s Emulex LPe1250 MMF LC-style
Fibre Channel Host Bus Adapter 2 x 8 Gbit/s Emulex LPe12002 MMF LC-style
Fibre Channel Host Bus Adapter 1 x 16 Gbit/s Emulex LPe16000B LC-style
Fibre Channel Host Bus Adapter 2 x 16 Gbit/s Emulex LPe16002B LC-style
Communication, Network Converged Network Adapter 2 x 10 Gbit/s PCIe 2.0 x8 ( Emulex )
Ethernet Ctrl. 1 x 1 Gbit/s PCIe 1.1 x1 ( Intel® )
Ethernet Ctrl. 1 x 1 Gbit/s PCIe x4 ( Intel® )
Ethernet Ctrl. 2 x 10 Gbit/s PCIe 2.0 x8 ( Fujitsu )
Ethernet Ctrl. 2 x 10 Gbit/s PCIe 2.1 x8 ( Intel® )
Ethernet Ctrl. 2 x 1 Gbit/s PCIe 2.1 x4 ( Fujitsu )
Ethernet Ctrl. 2 x 1 Gbit/s PCIe 2.1 x4 ( Intel® )
Ethernet Ctrl. 4 x 1 Gbit/s PCIe 2.1 x4 ( Fujitsu )
Ethernet Ctrl. 4 x 1 Gbit/s PCIe 2.1 x4 ( Intel® )
InniBand HCA 1 x 40 Gbit/s PCIe 2.0 x8 ( Intel® )
InniBand HCA 1 x 40 Gbit/s PCIe 3.0 x8 ( Mellanox )
InniBand HCA 1 x 56 Gbit/s PCIe 3.0 x8 ( Mellanox )
InniBand HCA 2 x 40 Gbit/s PCIe 2.0 x8 ( Intel® )
InniBand HCA 2 x 40 Gbit/s PCIe 3.0 x8 ( Mellanox )
InniBand HCA 2 x 56 Gbit/s PCIe 3.0 x8 ( Mellanox )
Graphics NVIDIA® Quadro® NVS 300 LP, PCIe x1, 2x DVI/VGA
Rack infrastructure Rackmount kit full extraction (820mm), tool less mounting, length variable 559-914mm
Cable Management for 19-inch DataCenter / PRIMECENTER Racks
Cable Arm 2U for PRIMECENTER- and 3rd-party racks
Warranty
Standard Warranty 3 years
Service level Onsite Service (depending on country)
Warranty Terms & Conditions http://support.ts.fujitsu.com/warranty/Index.asp?LNG=COM
Maintenance and Support Services - the perfect extension
Support Pack Options Globally available in major business areas:
9x5, Next Business Day Onsite Response Time
9x5, 4h Onsite Response Time
24x7, 4h Onsite Response Time
Recommended Service 24x7, Onsite Response Time: 4h - For locations outside of EMEA please contact your local Fujitsu partner.
Service Lifecycle 5 years after end of product life
Service Weblink http://www.fujitsu.com/fts/services/support

Fujitsu PRIMERGY RX300 S8 Specifications

General

Memory	Up to 768 GB DDR3
Form Factor	2U rack server
Remote Management	iRMC S4 (Integrated Remote Management Controller)
Chipset	Intel C602
Processor	Intel Xeon E5-2600 v2 product family
Storage	Up to 16 x 2.5" or 8 x 3.5" drives
RAID	RAID 0, 1, 5, 6, 10, 50, 60
Network	4 x Gigabit Ethernet ports
Expansion Slots	6 x PCIe 3.0 slots
Operating System Support	Windows Server, Red Hat, SUSE, VMware
Memory Type	DDR3 RDIMM/LRDIMM
Power Supply	Hot-plug redundant power supply units