Fujitsu PRIMERGY RX300 S8 Datasheet

Data Sheet FUJITSU Server PRIMERGY RX300 S8 Dual socket 2U rack server
Page 7 / 11 www.fujitsu.com/fts
Server Management
Option ServerView Suite - Deploy
SV Deployment Manager (full version)
ServerView Suite - Maintain
iRMC Advanced Pack incl. Advanced Video Redirection (AVR) and Remote Storage
ServerView Suite - Dynamize
SV Virtual-IO Manager (VIOM)
SV Resource Orchestrator Virtual Edition (ROR VE)
SV Resource Orchestrator Cloud Edition (ROR CE)
ServerView Suite - Integrate
SV Integration pack for Fujitsu ManageNow® solution
Server Management notes Regarding Operating System dependencies for ServerView Suite Software Products see dedicated Product Data sheets.
Dimensions / Weight
Rack (W x D x H) 482.6 mm (Bezel) / 445mm (Body) x 770 x 86.9 mm
Mounting Depth Rack 735 mm
Height Unit Rack 2 U
19” rackmount Yes
Weight up to 25 kg
Weight notes Actual weight may vary depending on conguration
Rack integration kit Rack integration kit as option
Environmental
Operating ambient temperature 5 - 40 °C
Operating temperature note Cool-Safe© Advanced Thermal Design (above 35 °C or below 10 °C) depending on conguration. For detailed
information see relevant system congurator.
Operating relative humidity 10 - 85 % (non condensing)
Operating environment FTS 04230 – Guideline for Data Center (installation specication)
Operating environment Link http://docs.ts.fujitsu.com/dl.aspx?id=e4813edf-4a27-461a-8184-983092c12dbe
Noise emission Measured according to ISO 7779 and declared according to ISO 9296
Sound pressure (LpAm) Minimum noise : 23 dB(A) (idle) / 22 dB(A) (operating)
Typical noise : 48 dB(A) (idle) / 49 dB(A) (operating)
Sound power (LWAd; 1B = 10dB) Minimum noise : 3.9 B (idle) / 3.8 B (operating)
Typical noise : 6.5 B (idle) / 6.6 B (operating)
Noise notes Noise emissions and operation modes depend on system conguration.
Electrical values
Power supply conguration 1-2x 450 W / 800 W hot-plug power supply
Max. output of single power supply 450 W (94 % efciency); 800 W (94 % / 96 % efciency)
Power supply efciency 94 % (80 PLUS platinum)
96 % (80 PLUS titanium)
Hot-plug power supply output 450 W (94 % efciency); 800 W (94 % / 96 % efciency)
Hot-plug power supply redundancy Yes
Rated voltage range 100 V - 240 V
Rated frequency range 47 Hz - 63 Hz
Rated current max. 8.2 A (100 V) / 3.3 A (240 V)
Rated current in basic conguration 100 V - 240 V / TBD
Active power (min. conguration) 53 W
Active power (max. conguration) 830 W
Active power note To estimate the power consumption of different congurations use the Power Calculator of the System Architect: http://
congurator.ts.fujitsu.com/public/
Apparent power (max. conguration) 873 VA
Heat emission 2988.0 kJ/h (2832.1 BTU/h)
Power Supply Notes Power Safeguard adapts system performance in case the wattage exceeds supply limits.

Fujitsu PRIMERGY RX300 S8 Specifications

General

Memory	Up to 768 GB DDR3
Form Factor	2U rack server
Remote Management	iRMC S4 (Integrated Remote Management Controller)
Chipset	Intel C602
Processor	Intel Xeon E5-2600 v2 product family
Storage	Up to 16 x 2.5" or 8 x 3.5" drives
RAID	RAID 0, 1, 5, 6, 10, 50, 60
Network	4 x Gigabit Ethernet ports
Expansion Slots	6 x PCIe 3.0 slots
Operating System Support	Windows Server, Red Hat, SUSE, VMware
Memory Type	DDR3 RDIMM/LRDIMM
Power Supply	Hot-plug redundant power supply units