Fujitsu PRIMERGY RX300 S8

System configurator and order-information guide
PRIMERGY RX300 S8 Status 2017-02-28
Change Report
Date Order number
Changes
2017-02-09 S26361-F5243-E4/L4
comment added
2016-09-27 S26361-F2735-L10
corrected from 50kg to 15kg
2016-06-02 S26361-F5243-E4/L4
added
2016-05-10 S26361-F3669-E671/L671
added
2016-05-10 S26361-F3669-E670/L670
added
2016-05-10 S26361-F3669-E661/L661
removed
2016-05-10 S26361-F3669-E660/L660
removed
2016-03-21 S26361-F1452-E140
added region kit europe
2016-03-14 T26139-Y1742-E10
changed color to black
2015-10-01 S26361-F5243-E660 changed comment for FastPath and CacheCade
2015-07-22 RAID controller updated
2015-07-21 S26361-F5520-E* Added 2.5" SAS 12G 10K 512n HDDs
2015-02-27 S26361-F5520-E* Added 2.5" SAS 6G 15K HDD up to 600GB within 3.5" Carrier
2014-11-28 2.5" & 3.5" Read-Intensive SATA SSDs added
2014-10-20 S26361-F5536-E2 added Emulex OCe14012 dual channel 10Gb NIC
2014-08-04 S26361-F5313-xxx 16Gb Qlogic added
2014-07-03 S26361-F5315-E* Added 3.5" SAS 12G SSDs
2014-07-02 S26361-F3848-E517 No ATD functionality with 32GB LRDIMM @ 1866 MHz
2014-06-30 S26361-F3301-E123 Added certification for India
2014-06-16 S26361-F3740-xxx EOL
2014-06-16 S26361-F3739-xxx EOL
2014-06-16 S26361-F3242-E201 / -L201 EOL
2014-06-10 S26361-F5319-E* Added 3.5" SATA 6G SSDs
2014-05-19 S26361-F3848-E517 Added 32 GB LRDIMM 1866 MHz
2014-05-06 S26361-F53250 new CNA OCe14102 added
2014-05-02 PCIe SSD SFF options removed
2014-04-03 S26361-F3776-E101 Cool-safe ATD restriction changed - 32GB and 64GB LRDIMM no more restricted
2014-03-18 SAS3.0 RAID Ctrl updated
2014-03-17 S26361-F3739-E201 phase out
2014-03-17 S26361-F3740-E201 phase out
2014-03-17 S26361-F3610-E202 EOL
2014-03-05 S26361-F1373-E540 HDD&RAID OOB monitoring by iRMC added
2014-01-30 S26361-F5303-* New SATA SSDs added.
2014-01-30 S26361-F5297-* New SAS 12G SSDs added.
2013-12-12 S26361-F3554-E8 restricted for ATD
2013-11-29 S26361-F3837-L64 SATA DOM (Disk on module) added
2013-11-27 S26361-F3301-E120 Restrictions CCC Certification for China updated
2013-10-28 SSD support with On-Board controller.
2013-10-28 restriction for 2.5" BC-SAS HDD with "*F3554-E8" removed.
2013-10-18 optional USB Comps no longer available
2013-10-16 S26361-F4610-E202 / -E204 added new 1Gb NICs from Intel
2013-10-09 S26113-F615-E10 add comment "110V range not supported"
2013-10-08 restrictions for Cool-safe ATD added
2013-09-19 Memory hint on CPU page extended
2013-09-13 S26361-F5247-E112 HDD 1.2TB SAS 10K added.
2013-09-03 RMK CMA not longer a must component
2013-09-01
First Release
Fujitsu PRIMERGY Server 31 of 31