Fujitsu PRIMERGY RX300 S8

System configurator and order-information guide
B
PRIMERGY RX300 S8 Status 2017-02-28
PRIMECENTER Rack
S26361-F2735-E175 S26361-F2735-E111 Further information for
Rack Mount Kit F1-C S7 LV
No Rackmount-Kit option rack mounting is available
for PCR M1 and 3rd party racks
Only for loose deliveries within the
consisting of
No mounting in racks possible
Corporate Partner Portal
vario carrier 559-914mm
max. 1x per system
telescopic drop-in rails 781mm
All "L" no's for loose delivery
with quick release lever support
with full extraction S26361-F2735-L10
with CMA adapter Adapter angle PC/DC-Rack, till 15Kg
1x per system C
necessary for mounting RMKs in
asymmetrical PC racks
S26361-F4530-E11 S26361-F4530-E10
Bracket 1U in asymmetrical racks
Mounting of RMK in symmetrical racks
(no support brackets needed)
S26361-F2735-L175
RMK-F1_DI_CMA_QRL_LV
for PCR M1 and 3rd party racks
S26361-F2735-E71 S26361-F2735-E82
with CMA adapter
Lateral cable management Rack Cable Management Arm CMA 2U
for 2U servers or higher
for 2U Server in racks
S26361-F2735-L176
- for asymmetrical racks - for symmetrical racks
RMK-F1_DI_QRL_LV
PRIMECENTER S2 or M1 M1 or 3rd party racks best choice for 3rd party racks
- 1 bracket PC Rack asym.
Fujitsu racks
w/o CMA adapter
1x per system 1x per system
S26361-F2735-L7
Lateral cable management (optionally)
can only be mounted
SNP:SY-F1647E301-P in asymmetrical PRIMECENTER
Installation ex works for one
S2 or new M1 racks in 1U above RMK
server or subsystem.
Hereby the rack will be delivered S26361-F2735-L82
completely pre-mounted and
Rack Cable Management Arm CMA 2U
all wired connections are tested. for 2U Server in racks.
With PCR M1 16U, 24U, 42U:
Systems and components S26361-F2201-L20
will be delivered installed in the rack
Cable arm 2U PCR M1 S and 3rd p.-racks
"Rack-mounting ex factory" for L176, has to be mounted above RMK
This service is to be ordered once
per installable server/storage
subsystem, in order to get the
To be ordered only together with server/storage subsystem
a PRIMECENTER rack mounted into the racks.
PCR S2 e.g. S26361-K826-V10x In case of not-installed server and subsystems
new PCR M1 e.g. S26361-K827-Vxxx this service has to be ordered,
refer PCR S2 or M1 rack configurator to get the mounting kits and the
max. 1x per System cables installed.
PRIMERGY Classic 19" rack is not supported
C
Fujitsu PRIMERGY Server 7 of 31