TX1330 M1
Operating Manual 55
Hardware installation
5.5.2 Using cable ties (hot-plug PSU)
You can secure the power cable using a cable tie to ensure that the insulated
connector cannot be disconnected from the server accidentally. The cable tie is
included in the accessories pack that is delivered together with the server.
Figure 4: Using cable ties (hot-plug PSU)
Ê Thread the cable tie through the eye (1).
Ê Pull the cable tie tight to secure the power cable.
The insulated connector cannot now be disconnected from the server
accidentally.
You can loosen the cable tie by opening the small locking lever (2).
햲
햳
To Next Page
Loading...
