Fujitsu PRIMERGY TX1330 M1 User Manual

TX1330 M1 Operating Manual 65
Starting up and operation
6.2.1.3 Indicators on the control panel
Symbol Indicator Status Description
Power-on
indicator
Power-on
indicator
green on Server is switched on and running.
orange on
Server is switched off, but mains
voltage is present (standby mode).
I After connecting the server
to the mains, it will take
about 60 seconds until the
server will switch into
standby mode.
yellow /
orange
flashing
iRMC booting
I After connecting the server
to the mains (power cord
plugged in / after mains
failure) the iRMC will boot.
The system cannot be
switched on, until the iRMC
boot sequence is complete.
During this time, the power-
on indicator will flash
yellow / orange.
yellow on
Power on delay
I After shutting down, the
server cannot be switched
on again right away. If the
On / Off button is pressed
right after shutting down the
server, the power-on
indicator will light up yellow
until the delay period ends
and the server will boot.
HDD / SSD
activity
indicator
green
flashing
Data access in progress

Fujitsu PRIMERGY TX1330 M1 Specifications

General

Brand	Fujitsu
Model	PRIMERGY TX1330 M1
Category	Server
Language	English