TX1330 M2
Operating Manual 63
Starting up and operation
iRMC-related status signals
I Please refer to the chapter "Updating or recovering the iRMC" in the
Upgrade and Maintenance Manual
9
AC connected
indicator
green on
is on in the following cases:
– the system is in power-off mode but
connected to the mains (AC
connected)
– the system has been switched on
and is in power-on delay
I After connecting the server to the
mains it takes about 60 seconds
until the server enters the
standby mode.
off
is off in the following cases:
– the system is not connected to the
mains
– the system is powered on and in
normal operation (S0)
ID indicator
Global error
indicator
Description
blue flashing off
A remote connection has been
established. Local VGA output has
been disabled during the remote
session.
blue flashing orange flashing
An emergency flash of the iRMC
firmware is in progress.
Pos. Indicator Status Description
To Next Page
Loading...
Need help?
General