TX140 S1 Operating Manual 11
1 Introduction
The PRIMERGY TX140 S1 server is an Intel-based server for small and
medium-sized companies. The server is suitable for use as a file server and also
as an application, information or Internet server. It is available as a floorstand or
rack model. The floorstand model can be converted to a rack model using an
optional conversion kit.
Due to its advanced hardware and software components, the PRIMERGY
TX140 S1 server offers a high level of data security and availability. These
components include hot-plug HDD modules, the Server Management
ServerView Suite, Prefailure Detection and Analysis (PDA) and Automatic
Server Reconfiguration and Restart (ASR&R).
Security functions in the BIOS Setup and on the system board protect the data
on the server against manipulation. Additional security is provided by the
lockable drive cover on the floorstand model and the lockable rack door on the
rack model.
The rack model occupies 5 height units in the rack.
1.1 Concept and target groups for this manual
This operating manual describes how to install, set up and operate your server.
This operating manual is intended for those responsible for installing the
hardware and ensuring that the system runs smoothly. It contains all the
information you need to put your PRIMERGY TX140 S1 into operation.
To understand the various expansion options, you will need to be familiar with
the fields of hardware and data transmission and you will require a basic
knowledge of the underlying operating system.
To Next Page
Loading...
Need help?
General