Fujitsu PRIMERGY TX140 S1 - Configuring the Server and Installing the Operating System Without the Serverview Installation Manager

TX140 S1 Operating Manual 77
Starting up and operation
6.4.4 Configuring the server and installing the operating
system without the ServerView Installation
Manager
Configure onboard SATA controller
Configure the controller as described in section "Configuring the onboard SATA
controller" on page 74.
Configure SAS/SATA RAID controller with "Integrated Mirroring
Enhanced"
Configure the controller as described in section "Configuring the SAS/SATA
RAID controller" on page 75.
Configure SAS/SATA RAID controller with "MegaRAID functionality"
Configure the controller as described in section "Configuring the SAS/SATA
RAID controller" on page 75.
Installing the operating system
Ê Insert the CD/DVD for the operating system you want to install.
Ê Reboot the server.
Ê Follow the instructions on screen and in the manual for the operating
system.