TX140 S1 Operating Manual 25
Functional overview
Onboard or integrated controllers
Slots
Front LAN (RJ45) 1 x dedicated management LAN port for iRMC S3
(10/100 Mbit/s) - optional
RAID Controller Modular RAID 0/1 controller with "Integrated
Mirroring Enhanced" (SAS IME) for SAS1.0.
RAID levels 0, 1 and 1E are supported for internal
hard disk drive configurations.
Modular RAID 0/1 controller with “MegaRAID
functionality” (SAS MegaRAID) for SAS1.0 and
SAS2.0.
RAID levels 0, 1,10 and 1E are supported for internal
hard disk drive configurations.
Modular RAID 5/6 controller with "MegaRAID
functionality" (SAS MegaRAID) for SAS1.0 and
SAS2.0. RAID levels 0, 1, 10, 1E, 5, 50, 6 and 60 are
supported for internal hard disk drive configurations.
SATA Controller A 6-port SATA controller is integrated on the system
board; up to four SATA hard disk drives can be
connected to the controller. The LSI Embedded
MegaRAID software (SATA Software RAID)
supports RAID levels 0, 1 and 10.
Remote Management
Controller
Integrated Remote Management Controller
(iRMC S3, 32 MB attached memory incl. graphics
controller), IPMI 2.0 compatible
Trusted Platform
Module (TPM)
Infineon / 1.2 (option)
PCI-Express Gen2 x1 1x
PCI-Express Gen2 x4 1x
PCI-Express Gen2 x16 1x
PCI 1x PCI 32/33 MHz, 1x long, 5V
Slot notes in SAS configuration 1x PCI-Express occupied by
modular RAID controller
To Next Page
Loading...
Need help?
General