Fujitsu PRIMERGY TX300 S7 System Configurator And Order-Information Guide

PRIMERGY TX300 S7
PRIMERGY RX350 S7
System configurator and order-information guide
Contents
Instructions
Configuration diagram 3.5" HDDs
Configuration diagram 2.5" HDDs
Configurator
0 System Software
I Basic unit
II Processor
III Memory
IV Graphics & GPGPU & Co-Processors
V Accessible drives / HDD Extension Box
VI Modular Raid Controller for 3.5" Hard Disks
VII Modular Raid Controller for 2.5" Hard Disks
VIII 3.5" SAS / SATA Hard Disk Drives
IX 2.5" SAS / SATA Hard Disk Drives
X External SAS Disk Array & Backup Drives
XI Fibre Channel
XII Communication/ Network
XIII System Management Products (RemoteView)
XIV Country specific Power Cords
Change report
PRIMERGY Server
February 2014

Fujitsu PRIMERGY TX300 S7 Specifications

General

Form Factor	Tower
Number of Processors	1 or 2
Chipset	Intel C600
RAID Support	RAID 0, 1, 5, 6, 10, 50, 60
Expansion Slots	Up to 7
Memory Type	DDR3
Storage Bays	Up to 8 x 3.5"
Network Interface	Gigabit Ethernet
Power Supply	800 W
Operating System	Windows Server, Linux