Fujitsu PRIMERGY TX300 S7 - Graphics & GPGPU & Co-Processors

System configurator and order-information guide
H
PRIMERGY TX300 S7 / RX350 S7 Status 2014-01-30
Section
IV
Graphics & GPGPU & Co-Processors
Graphics Controller integrated in iRMC S3 (integrated Remote Management Controller) with following resolutions:
1920x1200x16bpp, 1920x1080x16bpp, 1600x1200x16bpp, 1680x1050x16bpp, 1440x900x16bpp,
1280x1024x32bpp, 1152x864x16bpp, 1024x768x32bpp, 800x600x32bpp, 640x480x32bpp
S26361-F2571-E26
S26361-F2748-E537
Optional Front-VGA
PY VGA card 512MB PCI-e x1 S26361-F2748-L537
for Onboard Controller only
NVIDIA NVS300 PY VGA card 512MB PCI-e x1
consists of internal cable and
512 MB PCIe-x1
for loose delivery
front VGA connector
Connectors: 1x LFH 59
max. 1x per system
cable kit for 2x DVI or 2x VGA
cable kits included
Dual head + professional 2-D + 3-D
supported for Windows OS
native driver support for Linux OS
full height bracket
max. 1x per system
The hight end optional NVIDIA NVS300 graphic card offers dual head operation
and fully 3D video support. The cables for either two times
DVI-I or VGA (cable kit) connections are part of the delievery.
Remote Video direction via iRMC must be disabled.
This PCIe-x1 card can also be installed in any PCIe-x4, x8 or x16 slot.
Only one card per server is allowed.
One or two GPGPU (General Purpose Graphical Processor Unit) can be ordered as option.
The Power Cable kit has to be ordered seperatly and will be installed if ordered ex factory together
with the GPGPU card. New cards requires the suitable Air Duct and bracket kit!
No mix betwenn differnet types of GPGPU or Co-Processor cards allowed
S26361-F3736-E1
PY GPGPU Cable Kit
consists of 2 power cables and S26361-F3736-L1
an universal PCI card holder
PY GPGPU Cable Kit
max. 1x per system
consists of 2 power cables and
an universal PCI card holder
as long as stock last
vor loose delivery
S26361-F2856-E997
PY NVIDIA Tesla C2075 Computing-Processor PY NVIDIA Tesla C2075 Computing-Processor
NVIDIA Tesla C2075
800W PSU is recommended
6 GB Memory
PCIe Gen2-x16 S26361-F2856-L997
2x for GPGPU purpose only PY GPU card 6GB PCIe2 x16
800W PSU is recommended
for loose delivery
occupied space for two PCI slots
full height bracket
max. 2x per system
This mounting kits contain an airduct that uses 2 bays 1.6” x 5.25”. S26361-F3736-L2
If these are ordered this 2 bays cannot contain ODD or backup devices. PY K20 / K20X Mounting Kit
consists of 2 power cables, an
S26361-F3736-E2 Note the mountingkit is needed PCI card holder + Airduct
PY K20 / K20X Mounting Kit
only one timer per System
for loose delivery
consists of 2 power cables, an
The GPGPU cards can be ordered twice
1x
PCI card holder + Airduct
PY NVIDIA Tesla K20 / K20X
max. 1x per system
Computing-Processor 800W PSU is recommended
With 2x PY NVIDIA Tesla K20X
ambient temperature should not excced 30°C
S26361-F2222-E22 S26361-F2222-E24
PY NVIDIA Tesla K20 Computing-Processor PY NVIDIA Tesla K20X Computing-Processor
NVIDIA Tesla K20 NVIDIA Tesla K20X
5 GB Memory
6 GB Memory
PCIe Gen2-x16
PCIe Gen3-x16 technical via card BIOS GEN2
2x 2496 cores 2688 cores
for GPGPU purpose only for GPGPU purpose only
power cables from PSU needs to be ordered power cables from PSU needs to be ordered
800W PSU is recommended
800W PSU is recommended
occupied space for two PCI slots
occupied space for two PCI slots
full height bracket full height bracket
max. 2x per system
max. 2x per system
S26361-F2222-L22
S26361-F2222-L24
I
for loose delivery
NVIDIA Tesla GPGPU
Fujitsu PRIMERGY Server 18 of 36