Fujitsu PRIMERGY TX300 S7 - System Management Products (Remoteview)

System configurator and order-information guide
PRIMERGY TX300 S7 / RX350 S7 Status 2014-01-30
S
Section
XIII
System Management Products (RemoteView)
iRMC S3 (integrated Remote Management Controller) onboard server management
Controller with dedicated 10/100/1000 Service LAN-port and integrated graphics.
Optional 10/100 Service LAN-port on front panel.
The Service LAN-port can be switched alternatively on standard Gbit LAN port
S26361-F1790-E242
iRMC S3 advanced pack
integrated remote management controller
activation key for
graphical console redirection
and remote media redirection
max. 1x per system
S26361-F2571-E27
Maintenance LAN
Front management LAN Port
In combination with iRMC adv. pack
For local maintenance / console redirection,
Integrated in front (operating panel)
max. 1x per system
Section
XIV
Miscellaneous
Options and other peripherals
For other options, refer to SystemArchitect and Pricelist
These options are supplied lose with the shipment
For suitable peripherals for this product, please refer to SystemArcitect
S26361-F3776-E3
Configuration restrictions in LNM for TX300:
ENABLING LOW NOISE MODE TX300
Max 4x 3.5" or 8x 2.5" HDDs are allowed!
Restricts configuration to make
Max 2x PSUs are allowed!
LNM possible
No GPGPU cards are allowed!
LNM is enabled ex factory
LNM can be enabled later, as long as the configuration restrictions are fulfilled
max. 1x per system
When adding not compatible components later, LNM will be switched off automatically
T
Fujitsu PRIMERGY Server 34 of 36