CONTENTS
INTRODUCTION
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATIONS
3 SCANNING VARIOUS TYPES OF
DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
6.1 Removing Jammed Documents
6.2 Error Indications in the Operator Panel
6.3 Remedying Typical Troubles
6.4 Items to Check Before Contacting the Agent
Where You Bought the Scanner
6.5 Checking Labels on the Scanner
7 DOCUMENT SPECIFICATIONS FOR ADF
8 OPTIONS
9 SCANNER SPECIFICATIONS
Appendix
Symptom 6 : Images are distorted or blurred.
Back
Are the upper/lower glasses inside the
ADF clean?
No
Clean dirty locations.
For details on how to clean dirty
locations, see "
Chapter 4 DAILY CARE".
Yes
Is the ADF pressed down or heavy
object placed on the ADF during
scanning?
Yes
Do not press down the ADF or place
heavy object on the ADF during
scanning.
No
Is something causing the scanner to
vibrate during scanning?
Yes
Do not allow anything to cause the
scanner to vibrate while scanning.
No
Is the scanner installed on a flat, level
surface?
No
Install the scanner on a flat, level
surface.
Yes
If you cannot solve the problem after
taking measures, check the items in
"
6.4 Items to Check Before Contacting
the Agent Where You Bought the
Scanner" and contact the dealer or an
authorized FUJITSU service provider.
CONTENTS
To Next Page
Loading...
Need help?
General