Fujitsu ScanSnap fi-5110C User Manual

CONTENTS
INTRODUCTION
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATIONS
3 SCANNING VARIOUS TYPES OF
DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
6.1 Removing Jammed Documents
6.2 Error Indications in the Operator Panel
6.3 Remedying Typical Troubles
6.4 Items to Check Before Contacting the Agent
Where You Bought the Scanner
6.5 Checking Labels on the Scanner
7 DOCUMENT SPECIFICATIONS FOR ADF
8 OPTIONS
9 SCANNER SPECIFICATIONS
Appendix
Symptom 13 There is a shadow on the top and bottom edge of the
scanned images.
Back
Did you adjust the offset (starting
position for scanning the document)?
Yes
Check the items in "
6.4 Items to Check
Before Contacting the Agent Where
You Bought the Scanner" and contact
the dealer or an authorized FUJITSU
service provider.
No
Adjust the offset.
On [Scanners and Cameras] in the
control panel, adjust the [Sub-scan
Setting] (in case there is a shadow in
the top edge) or adjust the [Bottom] (in
case there is a shadow in the bottom
edge).
CONTENTS

Fujitsu ScanSnap fi-5110C Specifications

General

Brand	Fujitsu
Model	ScanSnap fi-5110C
Category	Scanner
Language	English