Fujitsu ScanSnap S1300 Installation And Troubleshooting Guide

Installing in Mac OS
61
12.Enter the user name and password for a user with Administrator
privileges, and click the [Install Software] button ([OK] button on Mac
OS X v10.6 or earlier).
D Installation starts.
On S1300i, the [About ScanSnap’s Auto Power OFF function] screen appears. Go to
step 13.
On S1500/S1500M/S1300, the message "The installation was successful" appears
on the screen. Go to step 16.
On S1100, the [ScanSnap S1100 How to load a document 1] screen appears. Go to
step 14.
13.Read the explanation, and then click the [Continue] button.
D The message "The installation was successful" appears on the screen. Go to step
16.

Fujitsu ScanSnap S1300 Specifications

General

Film scanning	No
Color scanning	Yes
Maximum scan size	216 x 360 mm
Scanner type	Sheet-fed scanner
Sensor type	CIS
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Maximum ISO A-series paper size	A4
Auto document feeder (ADF) input capacity	10 sheets
USB version	2.0
Standard interfaces	USB 2.0
Scan media weight	64 - 104.7 g/m²
Dimensions (WxDxH)	284 x 99 x 77 mm
Power requirements	AC 100 - 240V, 50/ 60 Hz
Non-operating relative humidity (non-condensing)	20 - 80 %
Minimum RAM	512 MB
Minimum storage drive space	2197 MB
Sustainability certificates	ENERGY STAR
Power consumption (standby)	5 W
Power consumption (typical)	9 W
Operating temperature (T-T)	5 - 35 °C
Certification	RoHS

Weight and Dimensions

Depth	99 mm
Width	284 mm
Height	77 mm
Weight	1400 g