Fujitsu SCENICVIEW A17-3 User Manual

SCENICVIEW A17-3/A19-3
Setting functions in the "Advanced" menu
Calling the
Advanced setting window
DDC-CI
Activate/deactivate DDC-CI function
On = the DDC-CI function is activated (default setting)
Off = the DDC-CI function is deactivated
Resolution
Notifier
Displaying monitor data
The optimum resolution for this monitor is 1280 x 1024 pixels. With the function
activated (
On), a message appears on the screen after approx. 30 seconds if a
different resolution is set.
Change the resolution to 1280 x 1024 to achieve optimum picture quality.
With the function deactivated (
Off), no message appears.
Factory Recall
Activating the factory settings
With this function all settings are reset to the factory settings without prompting for
confirmation.
Press the SELECT/MENU button to activate the function. The
Auto Processing
message is displayed.
Displaying information
Calling the
Information setting window
With this function the model designation, serial number, resolution, H/V frequency,
input signal and polarity of the synchronisation signal are displayed.
A26361-K1146-Z120-1-7619, edition 1 21

Fujitsu SCENICVIEW A17-3 Specifications

General

Brand	Fujitsu
Model	SCENICVIEW A17-3
Category	Monitor
Language	English