Application Unit AU47 Application Unit
16 U41861-J-Z126-1-76
SSD indicator
Figure 4: Indicators on the SSD drives
1
LED green BUSY
– Lights up: SSD in active phase
– Does not light up: SSD inactive
2
LED orange FAULT (orange)
(in conjunction with a RAID controller)
– Does not light up: No error
– Lights up: Faulty or Rebuild Stopped (drive defective / needs
replacing, a rebuild process was stopped or the slide-in module
was not correctly inserted)
– Slow flashing: Rebuild (the data is being restored after changing a
drive)
– Fast flashing: Identify
To Next Page
Loading...
