U41861-J-Z126-1-76 5
Dokuschablonen 19x24 Version 7.4us für FrameMaker V7.x vom 09.02.2010 © cognitas GmbH 2001-2010
Dokuschablonen 19x24 Version 7.4us für FrameMaker V7.x vom 09.02.2010 © cognitas GmbH 2001-2010
29. June 2015 Stand 16:47.07 Pfad: P:\FTS-BS\Server\SE-Server\SE-Doku\1303909_BA_Additional\prod_e\ba_addon.k01
1 Introduction
The FUJITSU Server BS2000 SE Series unites the existing server lines S servers and SQ
servers in the server line SE servers.
Depending on requirements, the SE server contains all the system components needed for
operation as an overall application:
– /390-based BS2000 Server Unit
– x86-based Server Units with BS2000, Linux or Windows guest systems
– x86-based Application Units for operation under Linux, Windows or VMware
– Shareable tape and disk periphery
– A high-speed, server-internal infrastructure to connect the components with each other
and with the customer LAN or SAN.
The SE700 / SE500 / SE300 Operating Manual, which consists of a number of modules,
describes the features and hardware components of the FUJITSU Server BS2000 of the
SE Series. Users should read the operating manuals carefully in order to obtain optimal
performance from the SE server.
This manual describes the optional hardware components such as Application Unit,
redundant Net Unit and peripheral devices, thus complementing the Basic Operating
Manual [1]. You will find a comprehensive introductory chapter in the Basic Operating
Manual . The chapters "Important notes" chapter on SE server operation and "Environ-
mental protection and service" are contained only in the Basic Operating Manual .
To Next Page
Loading...
Need help?
General