ETERNUS LT40 S2 tape library Periphery
60 U41861-J-Z126-1-76
4.2.7.2 Tape library error codes
If an error occurs during operation of the library, the library stops the current operation and
displays an error code on the LCD screen.
i If an error message is issued, please notify Customer Support.
Example error code
EVENT -6
A5 F1
where:
● Sequence number -6 indicates the position in sequence list, 0 being the most recent
● Log shows a load error (code A5 = fan error, sub code F1 = caused by the fan at the
back connector plate).
The event log with the library also includes a date stamp for each event. Press the ENTER
key to display the associated timestamp in the following format:
ddd:hh:mm:ss:HH
dabei sind:
ddd: days
hh: hours
mm: minutes
ss: seconds
HH: 1/100 seconds
To Next Page
Loading...
