EasyManua.ls Logo

Fujitsu SE700

Fujitsu SE700
64 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Application Unit Application Unit AU47
U41861-J-Z126-1-76 15
Dokuschablonen 19x24 Version 7.4us für FrameMaker V7.x vom 09.02.2010 © cognitas GmbH 2001-2010
Dokuschablonen 19x24 Version 7.4us für FrameMaker V7.x vom 09.02.2010 © cognitas GmbH 2001-2010
29. June 2015 Stand 16:47.07 Pfad: P:\FTS-BS\Server\SE-Server\SE-Doku\1303909_BA_Additional\prod_e\ba_addon.k03
2.1.1.4 Hard disks
Figure 3: Indicators on a hot-plug HDD module
If a hard disk drive continuously indicates an error, the drive should be replaced by
Customer Support as soon as possible. In this case call Customer Support.
1 HDD BUSY (green)
Lights up: HDD in active phase (drive active, access to drive)
Does not light up: HDD inactive
2 HDD FAULT (orange)
Does not light up: No HDD error
–Lights up:
HDD Faulty or Rebuild Stopped (drive defective, needs replacing, a rebuild process was
stopped or the slide-in module is not correctly inserted)
Slow flashing: HDD Rebuild
(the data is being restored after changing a drive)

Other manuals for Fujitsu SE700

Related product manuals