Fujitsu SP-1120 User Manual

Chapter 2 How to Load Documents
32
Appendix
Glossary
Contents
TOP
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Index
Introduction
HINT
 When scanning semi-transparent documents, increase the
brightness for scanning to avoid bleed-through.
 When you scan documents written in lead pencil, make sure to clean
the rollers frequently. Otherwise, the rollers will be contaminated
which may leave black traces on the document or cause feeding
errors.
For details about cleaning, refer to "Chapter 5 Daily Care" (page 48).
 If multifeeds, pick errors or paper jams occur frequently, refer to "7.3
Troubleshooting Problems" (page 68).
 When you scan documents with the ADF, all documents must be flat
on the leading edge. Make sure that curls on the leading edge of the
documents are kept within the following range.
30 mm or more
Feeding direction
3 mm
or less
5 mm
or less
30 mm or more
Feeding direction
(0.20 in.)
(0.12 in.)
(1.18 in.)
(1.18 in.)
Leading edgeLeading edge
Scanned side Scanned side

Fujitsu SP-1120 Specifications

General

Brand	Fujitsu
Model	SP-1120
Category	Printer
Language	English