Chapter 7 Troubleshooting
64
Appendix
Glossary
Contents
TOP
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Index
Introduction
4 Close the ADF.
For details, refer to "1.4 Opening/Closing the ADF" (page 17).
Be careful not to have your fingers caught
when the ADF closes.
ATTENTION
Check that the ADF is closed properly. Otherwise, the
document may not be scanned properly.
When scanning is complete or canceled, documents may
remain in the ADF without any error message displayed. In that
case, remove the documents by following the above steps 1 to
4.