Contents xiii
23. Switch Backplane Replacement 23–1
23.1 Overview of SWBPs 23–1
23.2 Cold Replacement 23–5
24. Addition and Deletion of a RDPF Option, Power Cabinet, and M9000 Expansion
Cabinet 24–1
24.1 Addition and Deletion of Rack-mountable Dual Power Feed 24–2
24.1.1 Overview of RDPF 24–2
24.1.2 Addition and Deletion 24–3
24.1.2.1 Addition 24–3
24.1.2.2 Deletion 24–13
24.2 Addition and Deletion of Power Cabinet 24–13
24.3 Addition and Deletion of M9000 Expansion Cabinet 24–16
25. Addition and Deletion of CMU, DIMM, IOU, HDD, PCI Cards and TAPEU
25–1
25.1 Addition 25–2
25.1.1 Active Addition 25–2
25.1.2 Cold Addition 25–3
25.2 Deletion 25–4
25.2.1 Active Deletion 25–5
25.2.2 Cold Deletion 25–5
A. System Configuration A–1
A.1 Installation Conditions A–1
A.2 System Configuration A–2
A.2.1 SPARC Enterprise M8000 Server A–2
A.2.2 SPARC Enterprise M9000 Server (Base Cabinet) A–4
A.2.3 SPARC Enterprise M9000 Server (Base Cabinet + Expansion
Cabinet) A–6
To Next Page
Loading...
