Need help?Do you have a question about the Fujitsu SPARC Enterprise M5000 and is the answer not in the manual?
General| Processor | SPARC64 VII |
|---|---|
| Maximum Memory | 512 GB |
| Memory Type | DDR2 |
| Operating System | Solaris |
| Cooling | Redundant fans |
| CPU Cores | 4 cores per CPU |
| Storage Type | SAS, SATA |
| I/O Slots | 12 |
| Expansion Slots | 4 PCIe |
| Form Factor | Rackmount |
| Power Supply | Redundant power supplies |
Lists available documentation for SPARC Enterprise servers.
Explains fonts and symbols used in the manual for clarity.
Provides essential safety information and references for handling the server.
Provides contact information for document feedback and support.
Details crucial safety measures for protecting users and equipment.
Outlines general safety guidelines for servicing server equipment.
Guides users on selecting appropriate diagnostic tools for troubleshooting.
Explains how to verify server and component states before and after maintenance.
Describes the server's operator panel, LEDs, and switches for status indication.
Discusses error interpretation and troubleshooting using FMA messages.
Explains the meaning and function of component LEDs for status indication.
Details commands like showlogs, fmdump, fmadm, and fmstat for diagnostics.
Covers essential Solaris commands for system and network troubleshooting.
Addresses specific problems like inability to locate the boot device.
Provides instructions for cleaning and maintaining the tape drive unit.
Outlines the three basic methods for replacing field-replaceable units (FRUs).
Describes replacing FRUs while the system or domain remains operational.
Details replacing FRUs when domains are powered off but the server is running.
Explains the procedure for replacing components after powering down the server.
Details how to slide the server out of the rack for component access.
Provides steps for removing and reinstalling the server's top cover.
Explains the process for removing and replacing the server fan cover.
Covers accessing, removing, installing, and securing hard disk drives.
Details the replacement procedure for CD/DVD drive units.
Provides instructions for replacing the tape drive unit.
Explains how to access, remove, install, and secure power supply units.
Details the process for replacing PCI cassettes in the server's I/O unit.
Describes how to remove and install PCI cards within cassettes.
Provides steps for accessing, removing, and installing the server's I/O unit.
Explains how to replace DC-DC converters within the I/O unit.
Details the procedure for replacing the eXtended System Control Facility unit.
Covers replacing 60-mm and 172-mm fan modules and backplanes.
Explains how to access, remove, install, and secure memory boards.
Details the procedure for replacing memory DIMMs on the memory boards.
Covers accessing, removing, installing, and securing CPU modules.
Describes procedures for installing SPARC64 VII/VII+ processors.
Details accessing, removing, installing, and securing motherboard units.
Explains how to replace DC-DC converters on the motherboard.
Covers notes and procedures for upgrading motherboard units.
Details accessing, removing, installing, and securing backplane units.
Covers replacing the server's operator panel.
Provides steps to access the operator panel for servicing.
Provides a general overview of SPARC Enterprise servers and FRUs.
Describes system boards like motherboard, CPU modules, and memory boards.
Details the I/O backplane/power backplane unit.
Explains the features and function of the I/O unit.
Lists power supply features and specifications.
Describes fan module features and replacement capabilities.
Details the functions and service of the XSCF unit.
Lists offered drive units and hard disk drive specifications.
Shows hardware configurations of the midrange servers.
Provides a general overview of SPARC Enterprise servers and FRUs.
Describes system boards like motherboard, CPU modules, and memory boards.
Details the I/O backplane/power backplane unit.
Explains the features and function of the I/O unit.
Lists power supply features and specifications.
Describes fan module features and replacement capabilities.
Details the functions and service of the XSCF unit.
Lists offered drive units and hard disk drive specifications.
Describes the pinout and signals of the serial port.
Details the pinout and signals for the UPS control port.
Describes the pinout and signals for the USB port.
Provides a diagram for connecting serial cables.
Explains the UPS controller's function in providing stable power.
Specifies the requirements for UPS signal cables.
Describes signal definitions and electrical specifications for UPS connections.
Lists electrical specifications for the UPS interface input and output circuits.
Details the specifications for UPS cables and connectors.
Describes the location and connections of the UPC connector.
Explains how air filters are held in place and the installation overview.
Provides instructions for testing fit and installing air filters on M4000 servers.
Provides instructions for testing fit and installing air filters on M5000 servers.
To Next Page
