EasyManuals Logo

Fujitsu SPARC Enterprise M5000 User Manual

Fujitsu SPARC Enterprise M5000
310 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #269 background imageLoading...
Page #269 background image
Appendix C FRU List C-3
C.2 System Boards
C.2.1 Motherboard Unit
The motherboard unit is the main circuit board for the midrange servers. The
following components connect to the motherboard unit:
CPU modules (two CPU chips per module)
Memory boards
Backplane unit
I/O unit(s) through the I/O backplane
eXtended System Control facility unit through the busbar/I/O backplane/power
backplane unit
Motherboard DC-DC Converter
The M4000 server motherboard unit provides power and signals to its mounted
components by a riser card. The M5000 server motherboard unit supplies power to
its mounted components from the power supply backplane by the bus bar/I/O
backplane/power backplane unit. To remove and replace the motherboard you must
power off the system, which is serviced from the top of the servers.
Refer to Section 13.1, “Motherboard Unit Replacement” on page 13-1 for replacement
procedures.

Table of Contents

Other manuals for Fujitsu SPARC Enterprise M5000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fujitsu SPARC Enterprise M5000 and is the answer not in the manual?

Fujitsu SPARC Enterprise M5000 Specifications

General IconGeneral
BrandFujitsu
ModelSPARC Enterprise M5000
CategoryServer
LanguageEnglish

Related product manuals