Appendix C FRU List C-11
C.8.2 CD-RW/DVD-RW Drive Unit (DVDU)
There are two types of CD-RW/DVD-RW drive units: tray load or slot load. Each
type of drive unit will connect only with its corresponding drive unit backplane.
TABLE C-9 lists the features, location, and specifications of the CD-RW/DVD-RW
Drive Unit.
Refer to Section 6.2, “CD-RW/DVD-RW Drive Unit (DVDU) Replacement” on
page 6-12 for replacement procedures.
C.8.3 Tape Drive Unit (TAPEU)
TABLE C-10 lists the features, location, and specifications of the optional tape drive
unit.
TABLE C-9 CD-RW/DVD-RW Drive Unit Features and Specifications for Midrange
Servers
Midrange Servers
Number of CD-RW/DVD-RW Drive Units
1
Location
Front of system to the right of the disk drives
Active replacement capability
No
Hot replacement capability
Yes
Cold replacement capability
Yes
Interface
Advanced Technology Attachment Packet Interface
(ATAPI)
TABLE C-10 Tape Drive Unit Features and Specifications for Midrange Servers
Midrange Servers
Number of tape drive units
1 (optional)
Location
Front of system
Active replacement capability
Yes
Hot replacement capability
Yes
Cold replacement capability
Yes
Tape drive unit type
*
Digital audio tape (DAT) drive
Interface
Serial Advanced Technology Attachment (SATA) (see
TABLE C-11)
To Next Page
Loading...
Need help?
General