Chapter 12 CPU Module Replacement 12-7
12.2 CPU Upgrade
This section describes procedures for installing SPARC64 VII/SPARC64 VII+
processors in M4000/M5000 servers:
■ Section 12.2.1, “SPARC64 VII/SPARC64 VII+ CPU Modules Added to a New
Domain” on page 12-8
■ Section 12.2.2, “SPARC64 VII/SPARC64 VII+ Processors Added to an Existing
Domain” on page 12-11
Note – Supported firmware and Oracle Solaris OS will vary based on the processor
type. For details, see the latest version of the Product Notes (for XCP version 1100 or
later) for your server.
Caution – You must complete the upgrades to the XCP firmware and to Oracle
Solaris OS before inserting SPARC64 VII/SPARC64 VII+ processors into the chassis.
For more information about configuring combinations of processors in domains, refer
to Section 2.2.13, “Domain Mode Configuration,” in the SPARC Enterprise
M3000/M4000/M5000/M8000/M9000 Servers XSCF User’s Guide. In particular, see the
section “Mounted Processors and CPU Operational Modes.”
To Next Page
Loading...
