EasyManuals Logo

Fujitsu SPARC Enterprise M5000 User Manual

Fujitsu SPARC Enterprise M5000
310 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #109 background imageLoading...
Page #109 background image
Chapter 6 Storage Devices Replacement 6-17
6.2.4 Installing the CD-RW/DVD-RW Drive Unit
Caution Do not force the CD-RW/DVD-RW Drive Unit into the slot. Doing so can
cause damage to the component and server.
Place the CD-RW/DVD-RW Drive Unit into the drive slot and gently push it in
until it locks in place.
6.2.5 Securing the Server
1. Power on the server.
This step includes reconnecting power cables, and turning the keyswitch to the
Locked position. See Section 4.4.2, “Powering the Server On Using Software” on
page 4-13.
Note If the Oracle Solaris automatic booting is set, use the sendbreak -d
domain_id command after the display console banner is displayed but before the
system starts booting the operating system to get the ok prompt.
2. Confirm the hardware.
This step includes running programs to be certain all components are mounted
again and then booting the operating system.
Refer to Section 4.3.2, “Verifying Hardware Operation” on page 4-9 for more
information.

Table of Contents

Other manuals for Fujitsu SPARC Enterprise M5000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fujitsu SPARC Enterprise M5000 and is the answer not in the manual?

Fujitsu SPARC Enterprise M5000 Specifications

General IconGeneral
BrandFujitsu
ModelSPARC Enterprise M5000
CategoryServer
LanguageEnglish

Related product manuals