Fujitsu Stylistic ST6012 User Manual

7
Drive0 Submenu of the System Menu
The Drive0 submenu identifies what ATA devices are installed.
Figure 4. Drive0 Master Submenu
Exiting from System Menu
When you have finished setting the parameters on this menu, you can either exit from the setup utility, or move to
another menu. If you wish to exit from the setup utility, press the [Esc] key or use the cursor keys to go to the Exit
menu. If you wish to move to another menu, use the cursor keys.
Table 4: Fields, Options and Defaults for the Drive0 Submenu of the System Menu
Menu Field Options Default Description
Drive0:
■
Disabled
■
Enabled
[Enabled] Allows you to enable or disable the hard disk drive.
Type:
---
--- The type of drive identified as Drive0.
Models:
---
--- The model of your hard disk
Capacity:
---
--- The maximum capacity of your hard disk
Phoenix SecureCore(tm) Setup Utility
F1 Help
ESC Exit
Select Item
Select Menu
-/Space
Enter
F9 Setup Defaults
F10 Save and Exit
Change Values
Select Sub-Menu
Item Specific Help
[Disabled]
The drive is disabled.
[Enabled]
The drive is enabled.
Drive0 [FUJITSU MHY2080BH]
Drive0: [Enabled]]
Type: Hard Disk
Model: FUJITSU MHZ2080BH
Capacity: 80GB
(80,026,361,856 Bytes)
▲
Info System Advanced Security Boot Exit
System Menu

Fujitsu Stylistic ST6012 Specifications

General

Brand	Fujitsu
Model	Stylistic ST6012
Category	Tablet
Language	English