What happens if I lost my Fujitsu Tablet Smart Card?
If you lose your user Smart Card for your Fujitsu Tablet, you can continue working with the Supervisor Smart Card and initialize a new user Smart Card. If you have lost both Smart Cards, you cannot boot your system.
What to do if Fujitsu STYLISTIC V535 Tablet PC does not start after switch on?
If your Fujitsu Tablet PC doesn't start, several factors could be at play. Ensure the battery is correctly installed in its compartment. If the battery is dead, try charging it, inserting a charged battery, or connecting the AC adapter. Also, verify that the AC adapter is properly connected to the Tablet PC.
How to fix a blank external monitor connected to Fujitsu STYLISTIC V535?
If the external monitor connected to your Fujitsu Tablet remains blank, first, ensure the monitor is switched on and adjust the brightness. If power saving is activated, press a key or tap the touchscreen. Check the graphics driver settings in "Intel Graphics Media Accelerator Driver for mobile" to ensure the external monitor is detected. Also, verify that the power and data cables are properly connected to both the Tablet PC and the external monitor. Power cycle both devices.
What to do if Fujitsu STYLISTIC V535 Tablet PC stops working?
If your Fujitsu Tablet PC stops working, first check if it's in energy-saving mode and exit that mode. If an application is causing the issue, close it or restart the Tablet PC. Also, ensure the battery isn't dead by charging it or connecting the mains adapter.
Why does the battery on my Fujitsu STYLISTIC V535 Tablet discharge so quickly?
If your Fujitsu Tablet's battery is discharging too quickly, it could be due to several reasons. If the battery indicator is flashing, the battery may be too hot or too cold; allow the Tablet PC to reach a normal temperature. If the battery life is extremely short, the battery may be old and need replacing. High power consumption applications may also be the cause. Use the mains adapter as frequently as possible. Reducing the screen brightness via Control Panel – Hardware and Sounds – Windows Mobility Center can also help.
How to fix wireless connection issues on Fujitsu STYLISTIC V535 Tablet?
If your Fujitsu Tablet has wireless connection problems, first ensure the wireless component is switched on. If it's on but the connection still fails, check whether the wireless connection is enabled by the software.
What to do if printer does not print from Fujitsu STYLISTIC V535 Tablet?
If your printer isn't printing from your Fujitsu Tablet, first ensure the printer is switched on and ready. Check that the data cable connecting the Tablet PC and the printer is properly connected. Also, verify that the correct printer driver is loaded.
What to do if battery indicator does not illuminate on Fujitsu STYLISTIC V535 Tablet?
If the battery indicator on your Fujitsu Tablet does not illuminate, the battery is likely discharged. Connect the AC adapter to the Tablet PC to charge the battery. Alternatively, hold the ON/OFF button pressed for at least 10 seconds and then connect the AC adapter to the Tablet PC to charge the battery.
How to correct the date or time on a Fujitsu STYLISTIC V535 Tablet PC?
To correct the date or time on your Fujitsu Tablet PC, use the BIOS-Setup-Utility to set the date and time in the main menu. For additional assistance, please contact your sales outlet or our Hotline/Service Desk.
How to improve display readability on Fujitsu STYLISTIC V535?
If the display on your Fujitsu Tablet is difficult to read, try moving the Tablet PC to a different position to avoid reflected glare. Alternatively, increase the screen's brightness.
General| Stepping | C0 |
|---|---|
| Processor code | SR1SK |
| Processor cache | 2 MB |
| Processor cores | 4 |
| System bus rate | - GT/s |
| Processor family | Intel Atom® |
| Processor series | Intel Atom Z3700 Series |
| Processor codename | Bay Trail |
| Motherboard chipset | Intel BayTrail-T SoC |
| Processor frequency | 1.59 GHz |
| Processor cache type | L2 |
| Processor lithography | 22 nm |
| Processor manufacturer | Intel |
| Processor package size | 17 x 17 mm |
| Conflict-Free processor | Yes |
| Processor front side bus | - MHz |
| Processor boost frequency | 2.39 GHz |
| Processor operating modes | 32-bit, 64-bit |
| Scenario Design Power (SDP) | 2 W |
| Internal memory | 4 GB |
| Memory clock speed | 1066 MHz |
| Internal memory type | LPDDR3-SDRAM |
| Storage media | - |
| Compatible memory cards | MicroSD (TransFlash) |
| Internal storage capacity | 64 GB |
| Display diagonal | 8.3 \ |
| Touch technology | Multi-touch |
| Display brightness | 400 cd/m² |
| Display resolution | 1920 x 1200 pixels |
| Native aspect ratio | 16:10 |
| Graphics card | HD Graphics |
| Rear camera type | Single camera |
| Rear camera resolution (numeric) | 8 MP |
| Front camera resolution (numeric) | 2 MP |
| Number of built-in speakers | 2 |
| Wi-Fi standards | 802.11a, 802.11b, 802.11g |
| Bluetooth version | 4.0 |
| Top Wi-Fi standard | Wi-Fi 4 (802.11n) |
| Microphone in | No |
| USB 2.0 ports quantity | 1 |
| Device type | Mobile tablet |
| Form factor | Slate |
| Product color | Black |
| Cable lock slot type | Kensington |
| Sustainability certificates | RoHS |
| Certification | CE, EN 60950, IT-Eco-Declaration, RoHS, WEEE, GOST |
| Battery capacity | 4425 mAh |
| Battery life (max) | 6.5 h |
| Battery recharge time | 5 h |
| AC adapter power | 36 W |
| AC adapter frequency | 50 - 60 Hz |
| AC adapter input voltage | 100 - 240 V |
| AC adapter output current | 3 A |
| AC adapter output voltage | 12 V |
| Platform | Windows |
| Operating system version | 64 |
| Operating temperature (T-T) | -10 - 50 °C |
| Operating relative humidity (H-H) | 10 - 90 % |
| Processor ARK ID | 80267 |
| Processor socket | BGA 1380 |
Weight and Dimensions| Depth | 12.5 mm |
|---|---|
| Width | 227.8 mm |
| Height | 150.1 mm |
| Weight | 540 g |
Describes front hardware components and their functions.
Details buttons and indicators located on the top of the device.
Details ports on the right side of the device.
Details components on the rear of the device.
Provides essential safety information and precautions for using the Tablet PC.
Safety guidelines specific to wireless components like Wi-Fi and Bluetooth.
Instructions on how to protect the device's display screen from damage.
Tips and methods for conserving power and extending battery life.
Guidance on utilizing Windows' energy saving features.
Recommendations and precautions for using the device while traveling.
Preparations and checks to perform before traveling with the Tablet PC.
Advice on power compatibility and local regulations when traveling abroad.
Guidelines for safely transporting the Tablet PC to avoid damage.
Information on the device's resistance to water and dust.
Instructions on how to clean the Tablet PC safely and effectively.
Additional details and warnings regarding cleaning the device.
Steps for unpacking and inspecting the device for any transport damage.
Guidance on selecting a suitable and safe environment for device setup.
Instructions on how to connect the AC adapter for power.
Steps for powering on the device for the initial setup.
Procedure for installing additional applications provided with the device.
Explains the indicator light for battery charging status.
Steps to turn on the Tablet PC and its functions.
How to configure the functionality of the ON/OFF button.
Procedures for correctly shutting down the Tablet PC.
Information on using the handwriting recognition feature.
Details about the touchscreen, pixel quality, and lighting.
Explanation of how the ambient light sensor adjusts screen brightness.
How to manage display output to multiple screens.
How to change the screen orientation between portrait and landscape.
Explains how to use touch gestures for navigation and control.
Specific touch gestures for Windows 8.1 Modern UI.
Specific touch gestures for Windows 8.1 Modern UI.
Specific touch gestures for Windows 8.1 Modern UI.
Specific touch gestures for Windows 8.1 Modern UI.
Describes touch gestures for Windows 8.1 Desktop environment.
Describes touch gestures for Windows 8.1 Desktop environment.
Details two-finger touch gestures for Windows 8.1 Desktop.
Describes the functions of the Tablet's physical buttons.
Information on using the built-in webcam.
Guidance on utilizing the device's energy saving features.
Illustrates the locations of the device's antennas.
Instructions on charging, maintaining, and caring for the battery.
How to check the current battery charge level.
Guidelines for storing batteries for optimal lifespan.
Procedure for safely removing and installing the rechargeable battery.
Step-by-step instructions for removing the battery from the device.
Step-by-step instructions for installing a new battery into the device.
Procedure for closing the battery compartment cover after installation.
Lists the types of memory cards supported by the Tablet PC.
Instructions for inserting a memory card into the slot.
Instructions for correctly removing a memory card from the slot.
Information on wireless components and their installation.
How to enable or disable the wireless components.
Steps for configuring WLAN access for network connectivity.
References for additional details on WLAN and Bluetooth connectivity.
Explanation of Near Field Communication technology and its use.
Information on the GPS function, if available.
Details about cradles for charging and connecting peripherals.
Identifies the parts and ports of the docking cradles.
Instructions for connecting to a network using Ethernet LAN.
Instructions for selecting a location and setting up the cradle.
Procedure to remove the cradle attachment for specific cases.
Steps to connect the Tablet PC to the docking cradle.
Procedure for safely disconnecting the Tablet PC from the cradle.
Instructions for attaching the Chip and Pin shell accessory.
Instructions for attaching the Chip and Pin shell accessory.
Instructions for attaching the Magnetic Stripe Reader shell accessory.
Instructions for attaching the Magnetic Stripe Reader shell accessory.
Instructions for attaching the Smart Card shell accessory.
Instructions for attaching the Smart Card shell accessory.
Instructions for attaching the Rugged Case accessory.
Instructions for attaching the Rugged Case accessory.
Details on the Full USB to LAN Conversion Adapter.
How to use the Kensington Lock for physical security.
Steps to set up password protection for the BIOS Setup Utility.
How to set supervisor and user passwords for BIOS access.
Detailed steps for assigning supervisor and user passwords.
Procedure to modify existing supervisor or user passwords.
Steps to remove existing passwords from the BIOS Setup.
How to enable password protection for system boot-up.
Information about the Smart Card reader and its usage.
Instructions for mounting the Smart Card reader accessory.
Instructions for inserting a Smart Card into the reader.
Instructions for connecting an external display device.
Details about the HDMI port on the docking cradle.
How to connect USB devices to the Tablet PC or cradle.
Procedure for safely disconnecting USB devices.
How to connect headphones or speakers using the audio jack.
Steps to launch the BIOS Setup Utility.
Options for saving or discarding changes and exiting BIOS Setup.
Procedures for resetting the device when it becomes unresponsive.
How to force the device to shut down.
Steps to reset BIOS settings to their default values.
Guidance on what to do when encountering unresolved problems.
Instructions for restoring the device's factory image.
Troubleshooting steps for incorrect date and time settings.
Troubleshooting steps when the battery indicator does not light up.
Troubleshooting steps when the touchscreen is blank.
Troubleshooting steps for poor touchscreen display readability.
Troubleshooting steps when an external monitor shows no display.
Troubleshooting steps for blank or unstable external monitor images.
Troubleshooting steps when the Tablet PC fails to power on.
Troubleshooting steps when the Tablet PC becomes unresponsive.
Troubleshooting steps when the printer fails to print.
Troubleshooting steps for wireless network connection issues.
Troubleshooting steps for rapid battery discharge.
Troubleshooting steps when the Smart Card reader is not detected.
What to do if the Smart Card PIN is forgotten.
What to do if user or supervisor Smart Cards are lost.
General advice for losing a Smart Card.
Explanation of common error messages and their solutions.
General specifications for the Tablet PC hardware.
Technical details about the Wireless LAN capabilities.
Technical specifications for the rechargeable battery.
Technical specifications for the AC adapter.
Specifications for the 10W AC adapter.
Specifications for the 60W AC adapter for cradles.
Technical specifications for the Universal Docking Cradle.
Technical specifications for the Universal Charging Cradle.
Technical specifications for the Chip and Pin shell.
Technical specifications for the Magnetic Stripe Reader shell.
Technical specifications for the Smart Card shell.
Technical specifications for the Rugged Case.
Information on proper disposal and recycling of the device and battery.
Details on battery recycling programs and procedures.
Notices related to Canadian interference-causing equipment regulations.
Safety instructions and precautions related to UL certification.
Information on the device's compliance with ENERGY STAR standards.
General regulatory notes and statements concerning wireless LAN.
Information on health and safety aspects of wireless LAN use.
Disclaimers and information regarding installation and use of wireless LAN.
FCC and IC compliance statements for the device.
Industry Canada declaration regarding device compliance.
Statement on the device's compliance with FCC interference limits.
Information on FCC radio frequency exposure guidelines and SAR limits.
FCC/Industry Canada declaration on radio frequency exposure.
Information on restrictions for exporting products with encryption.
Information regarding export restrictions on the product.
Specific notices for Canadian users regarding wireless bands.
Specific notices for Canadian users regarding wireless bands.
Instructions for setting up and configuring the optional Wireless LAN.
Specifies the Wireless LAN devices covered in this document.
Details on the characteristics of the WLAN device.
Description of different Wireless LAN operating modes.
Explanation of Access Point (Infrastructure) mode for wireless networks.
General instructions for handling the WLAN device.
Procedures for disabling or disconnecting the WLAN device.
Steps to configure the Wireless LAN for network connectivity.
Instructions for connecting to an active wireless network.
Common WLAN issues and their solutions.
Procedures for creating system image backups and recovery.
Instructions for creating bootable disks and recovery image sets.
How to back up essential software drivers and auto-installer.
Steps to recover the system when the hard drive is accessible.
Overview of the tools available for system recovery.
How to check if recovery tools are pre-installed.
Steps to run recovery tools directly from the hard disk.
Steps to run recovery tools from a bootable disk.
Details on the diagnostic, recovery, and utility tools.
Instructions to restore the recovery image from the hidden partition.
Steps to recover the system when the hard drive is not bootable.
Instructions to restore the recovery image for the entire hard drive.
Detailed steps for recovering image on new/non-bootable drives.
Steps to install essential software after system recovery.
Steps to install essential software after system recovery.
Guide to auto-installing software from hidden partition backups.
Guide to auto-installing software downloaded from the Fujitsu support site.
Steps to install essential software after system recovery.
Guide to auto-installing software from hidden partition backups.
Guide to auto-installing software downloaded from the Fujitsu support site.
To Next Page
