Accessories for your Tablet PC (opti
onal)
Rugged Case (optional)
• The Rugged Case consists of two components, an upper and a lower part.
• To prevent the device from dropping out of the Rugged Case, always screw
the two parts of the Rugged Case firmly together using the screws.
• The Rugged Case is only for the safe storag e and secure transportation of the
device. Do not use the Rugged Case for any other purpose.
• Keep the R ug ged Case away from fire or heaters.
When using the Rugged Ca
se together with one of the cradle variants (optional), you
must first remove the att
achment from the cradle before you can connect the Tablet PC in
the Rugged Case to the c
radle, see "
Removing the attachment from the cradle", Page 46
1
2
2
Fujitsu 55
To Next Page
Loading...
