First-time setup of your device
Connecting the AC adapter
MakingreadytouseACadapter
Observe the safety notes in the en closed "Safety/Regulations" manual.
The supplied A C cable conforms to the requireme nts of the country in which
you purchased your device. Make sure that the AC cable is approved for
use in the coun try in which you intend to u se it.
The adapter must only be used with the manufacturer supplied USB cable. DO NOT
CONNECT OR U SE a third party or aftermarket USB ch arging cable.
1
2
3
► Open the cover of the micro U S B port as shown.
► Connect the m
icro USB connector of the power cable (1) to the Tablet PC.
► Connect the connector of the po wer cable (2) to the AC adapter.
► Plug the AC
adapter into the power outlet (3).
20 Fujitsu
To Next Page
Loading...
