Wireless LAN User’s Guide
57
Problem
I want to remove
the driver
(Windows XP)
Possible Cause
Possible Solution
Windows XP:
When removing the driver, make sure that the device
is attached to the computer. If you try to remove the
driver while the device is detached from the
computer, the driver is not removed.
1. Click [Start], right click [My Computer], and then
click [Properties] from the menu that appears.
[System Properties] appears.
2. Click the [Hardware] tab.
3. Click [Device Manager].
4. Click [+] beside [Network adapters].
5. Right click [Intersil PRISM Wireless LAN PCI
Card], and click [Uninstall] from the menu that is
displayed. [Confirm Device Removal] appears.
6. Click [OK].
7. Close [System Properties].
8.
Make sure that the icon has disappeared from the
task tray in the lower right corner of the screen.
9.
Click [Start] -> [Control Panel]. [Control Panel] appears.
10. Double-click [Add/Remove Programs]. [Add/
Remove Programs] appears.
11. Perform the following steps.
•
Click [PRISM 11Mbps Wireless LAN for Windows].
• Click [Change/Remove].
A window appears asking you if you really
want to remove the driver.
12.
Click [Yes]. When the driver is removed, a window
appears showing that the driver has been removed.
13. Click [OK].
14.
Close [Add/Remove Programs] and [Control Panel].
15. Shut down Windows, and turn off the computer.
Alb6_UG (50-60) 10/24/02, 11:53 AM57
To Next Page
Loading...
