Fujitsu UTY-ASSX - How to Use; Start Communication

En-11
Copyright© 2013-2016 Fujitsu General Limited. All rights reserved.
7. HOW TO USE
7- 1 Start communication
Communication start
Click “communication start” button.
Communication stop
Click “communication stop” button.
Communication start
Communication stop
This error message means there is a
communication error. Conrm the followings.
▪ Is the power of target on?
▪ Is the cable correctly connected?
▪ Is the connector correctly connected?
If the above alert message is shown in the upper right hand side of window, target
model is not supported. Although communication and data reading is available, the
data may not be correct.