En-5
Copyright© 2013-2016 Fujitsu General Limited. All rights reserved.
1. OVERVIEW
This application is a service monitoring tool for Fujitsu General inverter and inverter
multi air conditioners.
It has the following four functions:
▪ Operation Monitoring
▪ Operation History display
▪ Error History display
▪ Protection Condition display
2. SYSTEM REQUIREMENTS
To use this program, the PC must have the following minimum specications:
▪ Microsoft Windows 7*, 8, 10.
* Machines upgraded from XP, Vista etc. are not assured.
▪ USB - 1.1 or higher. This is required for the Communication control box.
Please refer to section 6. CONNECTION for further details.
▪ Screen resolution greater than 1024x768 pixels.
3. INSTALLATION
3- 1 Install the device driver
Decompress MCP2200 Windows Driver and install it according to the attached instruc-
tion
3- 2 Install the application
Run setup.exe in the application folder. The program will be automatically installed.
3- 3 Uninstall
Control panel → Programs and features → run
Note: For details on installation, refer to the le "installation.txt" in the applica-
tion CD-ROM.
To Next Page
Loading...
