En-17
Copyright© 2013-2016 Fujitsu General Limited. All rights reserved.
7-2- 4 Conrm status of Protective function.
Protection detected
z
Conrming the Protective function activation time
When the stop for protection is activated, the Error message window pops up and the
detected protection is shown.
Detecting indicates the time the protection detecting started. Release indicates the time
the protection is was terminated. (deactivated).
In the graph, the detected protection is coloured.
▪ Graph is moved to the point of protection detecting by double-clicking Error
Message Window.
z
Save protection condition
You can save protection status into a le by pressing "Save".
To Next Page
Loading...
