Fujitsu UTY-RNRYZ5 - R.C. Sensor Setting; Password Setting; Display Item Setting

(4) If the password is entered cor-
rectly, the “Change Password”
screen is displayed.
0
CL
5
1
6
2
7
3
8
4
9
Cancel OK
Change Password
Enter New Password
When the new password is entered and the [OK] is
touched, after the setting change screen is displayed,
the display returns to the “Password Setting” screen.
PasswordrequesttothesettingitemOn/O󰀨isset.
(5) Touch the [Change Setting]
on the “Password Setting”
screen.
Password Setting
Change Password
Change Setting
Back
“Change Setting” screen is displayed. The screen has
3 or 4 pages which are switched by touching the [Next
Page] or [Previous Page].
On Time
r[
Off]
[Off]
[On]
Off Timer
Auto Off Timer
Change Setting Page 1/ 4
Cancel OK
Next
Page
Weekly Time
r[
On]
[On]
[On]
Set Temp. Auto Return
Set Temp. Range Setting
Change Setting Page 2/ 4
Cancel OK
Next
Page
Previous
Page
Anti Freez
e[
On]
[On]
[On]
Human Sensor Setting
Fan Control for Energy Saving
Change Setting Page 3/ 4
Cancel OK
Next
Page
Previous
Page
Initial Setting [On]
Change Setting Page 4/ 4
Cancel OK
Previous
Page
[On]
Maintenance
NOTE
Items that indoor unit does not support are not dis-
played.
(6) When password request item to be set or cleared is
touched, each setting screen is displayed.
(7) Touchthe[On]or[O󰀨].
(Example “On Timer” screen)
When the [OK] is touched, the
display returns to the “Change
Setting” screen.
On Timer
Cancel OK
On
Off
Applythesetting
(8) When setting is complete,
touch the [OK] on the “Change
Setting” screen.
(Example Page 1/4)
On Time
r[
Off]
[Off]
[On]
Off Timer
Auto Off Timer
Change Setting Page 1/ 4
Cancel OK
Next
Page
After the setting change screen is displayed, the display
returns to the “Password Setting” screen.
(9) When the [Back] on the
“Password Setting” screen is
touched, the display returns to
the “Initial Setting” screen.
Password Setting
Change Password
Change Setting
Back
3-9-7 DisplayItemSetting
(1) Touch the [Display Item Set-
ting] on the “Initial Setting”
screen.
Back
Previous
Page
Page 2/ 3 Initial Setting
R.C. Sensor
Setting
Password Setting
Display Item
Setting
Master Indoor
Unit Setting
Next
Page
FilterSignvisible/invisible
(2) “Display Item Setting” screen is displayed. Touch the
[Filter Sign] on the “Display Item Setting” screen.
(3) “Filter Sign” screen is displayed. Touch the [Visible] or
[Invisible].
(2) (3)
Filter Sign [Visible]
Display Item Setting
Cancel OK
Room Temp. [Invisible]
Filter Sign
Cancel OK
Visible
Invisible
When the [OK] is touched, the display returns to the
“Display Item Setting” screen.
RoomTemp.visible/invisible
(4) Touch the [Room Temp.] on the “Display Item Setting”
screen.
(5) “Room Temp.” screen is displayed. Select the [Visible]
or [Invisible].
(4) (5)
Filter Sign [Visible]
Display Item Setting
Cancel OK
Room Temp. [Invisible]
Room Temp.
Cancel OK
Visible
Invisible
When the [OK] is touched, the display returns to the
“Display Item Setting” screen.
NOTE
Displayed room temperature is the approximate tempera-
ture detected around this remote controller, and it could
bedi󰀨erentfromtheactualroomtemperature.Italsobe
inuencedbytheinstallationenvironmentoftheremote
controller.
Applythesetting
(6) When the setting is complete,
touch the [OK] on the “Display
Item Setting” screen.
After the setting change
screen is displayed, the
display returns to the “Initial
Setting” screen.
Filter Sign [Visible]
Display Item Setting
Cancel OK
Room Temp
.[
Visible]
En-20