Fujitsu UTY-RVRY UTY-RVRG UTY-RVRX - Operation Mode Screen; Set Temp. Screen

(c) Event icon
Theicondisplaydi󰀨ersdependingonthesetting.
NOTE
Depending on the indoor unit settings, [Custom auto] may
be displayed instead of [Auto].
■
Event icon example
Event
icon
Detail
Icon color Mode Set temperature
Blue Cool 28.0°C
Green Dry 28.0°C
Red Heat or
10°C (50°F)
heat
24.0°C
Purple Auto 26.0°C
Blue and red Custom
auto
Cool:28.0°C
Heat:23.0°C
White Fan —
Black Operation stop
(d) Active marker
Appears on the icon that is selected or being set.
(e) Event selector
The same number of points as the icons are displayed at
regularintervals.Iftheiconsareoverlappinganddi󰀩cult
to select, tap here.
(f) Setting menu
Set event details. Tap to move to each setting screen.
Set the following items.
• Operation mode (refer to 3-1-4.)
• Set Temp. (refer to 3-1-5.)
• Time (refer to 3-1-6.)
• Operation Setting (refer to 3-1-7.)
(g) Add Event button
Tap here to create a new event or add one.
(h) Delete button
Tap here to delete the event with the active marker dis-
played.
3-1-4 Operation mode screen
(c)
(a)
(b)
(a) Operation mode menu
Select and tap a operation mode. Swipe up or down on
any hidden items.
NOTE
If set “3-1-7 Operation Setting screen” to “Off”, do not
need to set this item.
(b) Cancel button
Taptodisplayaconrmationscreen.Tap[OK]onthe
conrmationscreentoreturntothepreviousscreen.
(c) OK button
Taptoconrmthesettingandreturntotheprevious
screen.
3-1-5 Set Temp. screen
(c)
(a)
(b)
(a) Temperature setting button
Tap the button to set the temperature.
NOTES
• This item cannot be set when “10°C (50°F) heat” or “Fan”
mode is selected in “3-1-4 Operation mode screen”.
• If set “3-1-7 Operation Setting screen” to “Off”, do not
need to set this item.
(b) Cancel button
Taptodisplayaconrmationscreen.Tap[OK]onthe
conrmationscreentoreturntothepreviousscreen.
En-9