Fujitsu UTY-RVRY UTY-RVRG UTY-RVRX - Preference Settings

5-2-3 Display Item
NOTE
Some items may not be displayed depending on the
model of the indoor unit or the settings of the controller.
(a) (b)
(c)
(a) Backward button
Tap to return to the previous screen.
(b) Home button
Tap to move to the temperature setting screen (home
screen).
(c) Toggle button
Enable the items to be displayed on the screen.
Enable
Disable
5-2-4 Set Temp. Limit
Power consumption by excessive temperature setting is sup-
pressed by restricting the temperature setting range for each
operationmodeofCool/Dry,Heat,orAuto.
5-2-4-1
(a)
(a) Toggle button
Taptotoggleenable/disable.
Enable
Disable
5-2-4-1 Set Temp. Limit (settings menu)
NOTE
Some items may not be displayed depending on the
model of the indoor unit.
(a) (b)
5-2-4-2
(a) Backward button
Tap to return to the previous screen.
(b) Home button
Tap to move to the temperature setting screen (home
screen).
5-2-4-2 Limit of Cool/Dry, Heat or Auto
NOTE
ThesettingmethodforCool/DryandHeatisthesame.
■
Example of the Limit of Cool/Dry screen
(1) Set the upper and
lower temperature
limits.
(2) Tap [OK] to return to
the previous screen.
5-2-5 RC (Remote Controller) Sensor
This setting uses the sensor of this unit to sense the room
temperature. The room temperature can be sensed at a posi-
tion, closer to the person than the indoor unit sensor. Factory
settings is “Disable”.
(a)
(a) Toggle button
Taptotoggleenable/disable.
Enable
Disable
En-22