Fujitsu UTY-RVRY UTY-RVRG UTY-RVRX - Detail

3-1-9 Create the schedule
■Selecttimer
Tap the timer (1 or 2) to
create the schedule.
■Createascheduleforanydayoftheweek
(1) Tap the day of the
week to create the
schedule.
(2) Tap [+ Add Timer] to
add an event.
(3) Tap the following
items of the added
event to set them.
Swipe up or down
on items you cannot
see.
“Operation mode”
“Set Temp.”
“Time”
“Operation setting
(On/Off)”
(4) When all settings are
completed, tap [OK].
■Operationmode
*ThisitemdoesnotneedtobesetwhenoperationO󰀨.
(1) Swipe up or down to
select an operation
mode, then tap.
(2) Tap [OK ].
■SetTemp.
*ThisitemdoesnotneedtobesetwhenoperationO󰀨.And
it cannot be set when “10°C (50°F) heat” or “Fan” mode is
selected.
(1) Set the temperature
with [
∧
] or [
∨
].
(2) Tap [OK ].
■Time
* The display format of the time depends on the setting.
(1) Tap the Hour, Minute,
AM/PM(ifavailable)
item to select from
the open list.
(2) Tap [OK ].
■Operationsetting(On/O󰀨)
(1) Tap[On[or[O󰀨].
(2) Tap [OK ].
En-11