Fujitsu UTY-RVRY UTY-RVRG UTY-RVRX - Setting; Timer Settings

4-3-4-2 Cool/Dry or Heat (setting)
NOTE
ThesettingmethodforCool/DryandHeatisthesame.
■
Example of the Cool/Dry screen
(d)
(c)
(e)
(g)(f)
(a) (b)
(a) Backward button
Tap to return to the previous screen.
(b) Home button
Tap to move to the temperature setting screen (home
screen).
(c) Return time setting
button
Tap to select a time
from the pull-down
menu. It can be set in
units of 10 minutes in
the range of 10 to 240
minutes.
To close the pull-
down menu, tap [
]
at the top.
(d) Return temperature setting button
Tap to set the return temperature. This setting is not nec-
essary if the return temperature is set to the weekly timer
setting.
(e) Schedule temperature toggle button
When enabled, the return temperature will be the weekly
timer setting. To use this function, need to set the weekly
timer.
Enable
Disable
(f) Cancel button
Taptodisplayaconrmationscreen.Tap[OK]onthe
conrmationscreentoreturntothepreviousscreen.
(g) OK button
Taptoconrmthesettingandreturntotheprevious
screen.
Whenthesettingsarechanged,aconrmationscreen
willbedisplayed.Tap[OK]ontheconrmationscreento
return to the previous screen.
4-4 Safety shield
4-4-1 Anti-Freeze
Anti-Freeze is a function that performs low temperature heat-
ing operation to prevent freezing of water lines and equip-
ment,whenairconditioningoperationiso󰀨,inregionswhere
outside temperature may drop below freezing.
NOTE
If water lines are far from the unit or within exterior walls,
this function may not provide enough anti freeze protec-
tion.
(a)
(a) Toggle button
Taptotoggleenable/disable.
Enable
Disable
4-4-2 Emergency Heat
Auxiliary heater will be primary heater, and the outdoor unit
will stop.
(a)
(a) Toggle button
Taptotoggleenable/disable.
Enable
Disable
4-5 Cleaning
4-5-1 Panel Cleaning
Operation is prohibited for 30 seconds to prevent erroneous
operation due to cleaning.
NOTE
When cleaning the touch screen panel, wipe with a soft
and dry cloth. Do not use water, harsh abrasive cleans-
ers, or volatile agents like benzene or thinner.
(a)
(a) Start button
When tap [Start], the display panel will not respond to
wiping for 30 seconds.
4-5-2 Filter Sign Reset
Aftercleaningthelter,resettheltersign.
(a)
(a) Reset button
Tap[Reset]toresettheltersign.
En-17