- 67 -
►
PWM circulator signals
Off The pump does not work, no electrical power.
Green On The pump works normally.
Green/Red blink
Circulation pump operation in "alert" mode
(under unusual conditions such as: dry running, motor overload due to impurities
in the water, etc.).
Red blink
Operating error due to a persistent external fault
(abnormal voltage/current, external pump blockage, reverse fl ow, etc.).
Circulation pump stops. The circulation pump restarts once the issue is resolved.
Red On
Operating error / Permanent shutdown.
Circulation pump replacement.
Waterstage Split Comfort DHW Serie / INSTALLATION / 2125 - EN
To Next Page
Loading...