Fujitsu WOYA080LFCA User Manual

3.7 Parametering the setting
3.7.1 General
Only the parameters accessible to levels:
End user
... are described in this document.
The parameters accessible at level:
Commissioning
Engineer
… are described in the document reserved for
these professional specialists. Do not make any
modications to these parameters without advice
from these professional specialists. Incorrect use
of any kind may result in serious malfunctioning.
3.7.2 Setting parameters
With the screen on basic display.
- Press OK.
Once in "End user" level.
- Scroll the menu list.
- Choose the desired menu.
- Scroll the function lines.
- Choose the desired line.
- Adjust the parameter.
- Check the setting by pressing OK.
- To return the menu, press ESC.
If no setting is made for 8 minutes, the screen returns
automatically to the basic display.
3.7.3 List of "End user" settings
Line Function Setting range
or display
Setting
increment
Basic
setting
Time of day and date
1 U Hours / Minutes 00:00... 23:59 1
2 U Day / Month 01.01... 31.12 1
3 U Year 1900... 2099 1
Operator Section
20 U Language English, Français, Italiano,
Nederlands...
English
OK
Brief
press
End user
OK OK OK
Time and date Hours / minutes 1 Hours 1...24 h
User interface Day / Month 2 Minutes 0...60 min
CC1 time program Year 3
...
Operation manual "1534 - EN"
Air to Water Heat Pump Split system
- 12 -

Fujitsu WOYA080LFCA Specifications

General

Brand	Fujitsu
Model	WOYA080LFCA
Category	Heat Pump
Language	English