Questions? Please Contact Your Local Manufacturer’s Representative
4-3
SECTION 4 EDR-SOLA-IOM-2022-0216 MAINTENANCE
! WARNING
All information in this manual is for
reference and guidance purposes,
and does not substitute for required
professional training, conduct,
and strict adherence to applicable
jurisdictional/professional codes and
regulations.
Never use open ame or other sources
of ignition to check for gas leaks.
Ensure boiler is o and cooled,
with proper lockout - tagout per
local codes prior to service and
maintenance.
4 CAUTION
Use caution when using any cleaning
solutions. Refer to local regulations for
proper cleaning solution disposal.
Do not allow dust or dirt to accumulate
around the boiler.
Tool List
To complete routine preventative maintenance or repairs, certain tools and
supplies will be required that are not provided with the boiler. The qualied
service technician should be prepared with the following tools and supplies.
Digital Multimeter (DMM) with True RMS
Maintenance Checklist Form and Pen/Pencil
Slack Tube® Monometer or Equivalent
GAS-Mate® Combustible Gas Leak Detector or Equivalent
Calibrated Flue Gas Analyzer
Calibrated Calipers
Calibrated Torque Wrench
Calibrated Torque Screwdriver with T25 Drive
Pipe Wrenches
Crescent Adjustable Wrench
Blade (Flat-Head), Phillips, and Torx Screwdriver Sets
Close Quarters Angled Phillips Screwdriver
Socket Wrench
SAE Socket Set
SAE Deep Socket Set
Metric Socket Set
Metric Deep Socket Set
SAE Wrench Set
Metric Wrench Set
9/16” Crowfoot Wrench
Metric Allen/Hex Key Wrench or Socket Set
Super O-Lube or Equivalent
Permatex® Dielectric Grease or Equivalent
Loctite® C5-A Copper Anti-Seize or Equivalent
Hercules® Megaloc® Thread Sealant or Equivalent
Portable Shop Vacuum
Compressed Air with Blow Gun Nozzle
Appropriate Personal Protective Equipment (PPE)
Lockout-Tagout (LOTO) Tag
To Next Page
Loading...
