FUNAI 46FD753P - Max Volume Control; Hotel Database Management; Clear Hotel Mode Locks

27
EN
[Max Volume]
You can set maximum limit of audio volume.
5 Use Ÿ / ź to select [Max Volume], then press Ż
/ Ź to adjust the audio volume.
[Import Database]
You can import the Hotel Mode settings from USB flash
memory.
5 Use Ÿ / ź to select [Import Database], then
press OK.
[Export Database]
You can export the current menu settings to USB flash
memory.
5 Use Ÿ / ź to select [Export Database], then
press OK.
[Clear Lock]
You can restore the Hotel Mode settings.
5 Use Ÿ / ź to select [Clear Lock], then press
OK.
• If you set to [On] in [Lock System], you cannot turn the
volume up over setup volume.
• After importing, the unit will go into the standby mode
automatically.
• If a USB flash memory does not insert, an error message
will appear.
• During exporting, LED on front panel will turn into red. (It’ll
take about 5 - 10sec.)
• After exporting, no message will appear.
• It takes about 10 seconds to complete the exporting the
data.
• If a USB flash memory does not insert, an error message
will appear.