Contents
Initial Operation
1. Initial Operation / Unpacking and Checking the Scope of Delivery 3
2 Initial Operation / Setting up 3
3. Initial Operation / Electrical Connection of the Device 3
4. Initial Operation / Connecting the Power Cable 3
5. Initial Operation / Connecting the Hoses 3
6. Initial Operation / Printer Connection 4
7. Initial Operation / Turning the Device on 4
8. Initial Operation / Turning the Printer on, Inserting a Roll of Paper 4
9. Initial Operation / Operating the Device 4
10. Initial Operation / Turning the Device off / on 4
11. Initial Operation / Zero Calibration 5
Operation 6
1. Operation / Measuring --------------------------------------------------- 6
2. Operation / Rinsing --------------------------------------------------- 7
3. Operation / Product Selection / Example 7
4. Operation / Cleaning 7
5. Operation / Setup 7
5.1. Return 7
5.2 System Status: 8
5.3. Intensive Cleaning 8
5.4. Configure Parameters 8
5.5. Language Selection 9
5.6. Adjust pump 9
5.7. Measurements per Sample 9
5.8. Date 9
5.9. Time 9
Calibration 9
6. Operation / Calibration 11
6.1. Performing Calibration 11
6.2. Return 11
6.3. Name 11
6.4. Matrix 11
6.5. Product Selection 11
6.6. Fast / Precise 12
6.7. Selection of the Substance Parameters to be Calibrated 12
6.8. Entering the Reference Values 12
6.9. Starting B Calibration 12
How the LactoFlash works 13
1. Structure of the Device 13
2. Description 13
3. Sample suction tube 14
4. Pump 14
5. Replacing the pump head 14
Requirements of the Milk Samples to be Analysed 15
2 LactoFlash 31. Januar 2013
Ordering data
3530 * LactoFlash
3563 * Cleaner, 0,5 litre
3565* -
--
-FUNKE GERBER
FUNKE GERBERFUNKE GERBER
FUNKE GERBER Zero-Diluent
8818* Erlemeyer flask, 100 ml
7151* Thermal printer, incl. 1 roll thermal paper
(items marked with * are included in the 3530 package)
Accessories (optional)
3040 Milk sample bottle without metal base , 80 ml / PE
3041 Milk sample bottle with metal base, 50 ml / PP
7157 Thermal paper roll for thermal printer
Spare and consumable parts
3530-023 Hose pump, complete
3530-023 A Pump head (attachment for hose pump)
7157 Thermal paper roll for thermal printer
Guarantee conditions
1. Guarantee period
The guarantee period is 12 months from the date of invoice.
2. Guarantee terms
During this period replacement parts will be exchanged at no cost.
The measuring cells will only be exchanged after they have been returned at no
cost to us and under the condition that they are intact, i.e. no attempts of repair
or opening have been made. After expiry of the guarantee period, these analyser
units are only sold after return of the defective unopened components.
The attachment for the hose pumps (hoses) is a consumable part. Depending
on the sample applications, these pump heads must be replaced from time to
time (e.g. annually).
LactoFlash 31. Januar 2013 19
To Next Page
Loading...
