-17-
Troubleshooting
Bluetooth Adapter
Problem Cause Remedy
The system does not
react after switching on
the ignition
The system is manually
or automatically started.
The Bluetooth adapter
must be connected.
Manually start the
system by pressing the
"Accept" button or wait
max. 40 seconds until the
system starts automati-
cally.
Power supply is unavaila-
ble
Replace the fuse if
necessary and check the
connections and connec-
tion lead of the system
connector and adapter
The adapter is not speci-
fied for the system.
Only the adapter speci-
fied for the system can be
used.
The display remains off
after connecting the
Bluetooth adapter and
the system does not
react.
The system does not
react after pressing the
"Accept"
button.
Power supply is unavaila-
ble
The ignition must be swit-
ched on; Replace the fuse
if necessary and check
the connections and con-
nection lead of the
system connector and
Bluetooth adapter
To Next Page
Loading...
